TG1G-03-A-40
Deceleration valve, one-way deceleration valve
This type of valve is operated by a cam, which simply increases or decreases the flow rate and opens or closes the oil circuit inside the valve.
Suitable for situations where acceleration, deceleration, and stop control of actuator components are required during machine tool worktable feeding, with a one-way valve type and cam position independent, it can obtain free fluid flow in the opposite direction of the control fluid flow.
The models are:
Threaded connection type:
Z*T-03-*-*-22 Z*T-06-*-*-22 Z*T-10-*-*-22
Bottom plate connection type:
Z*G-03-*-*-22 Z*G-06-*-*-22 Z*G-10-*-*-22
Throttle valve, one-way throttle valve
Used for speed control of actuators in circuits where the working pressure is almost constant and allows for some fluctuations in flow rate with changes in working pressure. The use of a pressure balancing mechanism makes it easy to adjust the flow rate even under high pressure. With a one-way valve type, free liquid flow can be obtained in the opposite direction of the control liquid flow.
Model:
Threaded connection type:
SRT-03-50
SRCT-03-50
SRT-06-50
SRCT-06-50
SRT-10-50
SRCT-10-50
Bottom plate connection type:
SRG-03-50
SRCG-03-50
SRG-06-50
SRCG-06-50
SRG-10-50
SRCG-10-50
Flange connection type:
SRF-10-50
SRCF-10-50
SRF-16-50
SRCF-16-50
Feed control valve
Composed of a one-way speed control valve and a reduction valve, mainly used in machine tools, it has a cam to switch from fast feed to cutting feed, and the cutting feed speed can be adjusted arbitrarily.
Due to pressure and temperature compensation, the set flow rate remains constant even when pressure (load) and temperature (oil viscosity) change.
Model:
UCF1G-01-4-A-*-11
UCF1G-01-4-B-*-11
UCF1G-01-4-C-*-11
UCF1G-01-8-A-*-11
UCF1G-01-8-B-*-11
UCF1G-01-8-C-*-11
UCF1G-03-4-*-10
UCF1G-03-8-*-10
UCF2G-03-4-*-10
UCF2G-03-8-*-10
UCF1G-04-30-30
UCF2G-04-30-30
Pilot controlled speed regulating valve, pilot controlled one-way speed regulating valve
The function of the flow control knob of the speed regulating valve is replaced by a pilot cylinder, which enables the actuator to have smooth flow characteristics during addition and subtraction, and can achieve shock free operation. Due to the presence of pressure and temperature compensators, stable flow control can be achieved regardless of changes in pressure (load) and temperature (oil viscosity).
Model:
FH*G-02-30-*-13
FH*G-03-125-*-13
FH*G-06-250-*-13
FH*G-10-500-*-13
needle valve
Used as a shut-off valve on pressure gauge pipelines and small capacity pipelines, it can also be used as a throttle valve on control pipelines to regulate flow.
Model:
Direct type: GCT-02-32
Right angle type: GCTR-02-32
