ZZC
Sensepoint XCD transmitter | ||||||||
make use of | 3 Line, 4-20mA, universal transmission is suitable for catalytic combustion, | |||||||
electrochemical and NDIR multiple sensing shake, | ||||||||
Electrical parameters | Input voltage: STD, RFD: 16-32Vdc (rated: 24Vdc), RTD: 18-32Vdc (rated: 24Vdc) | |||||||
Power consumption: electrochemistry: 3.7W, infrared: 3.7W, catalytic combustion 4.9w | ||||||||
Current output: | 4-20mA (Mai or meal) | |||||||
hitch | ||||||||
4.0 mA- 20.0 mA | Standard gas detection | |||||||
2.0 mA or 4.0 mA (17.4 m) | Suppress the output when setting the parameters or calibration | |||||||
22.0 mA | outrange | |||||||
binding post | The sro: 15 connections: RTD & RFD: 18 terminals, | |||||||
Diameter of 0.5mm(20AWG)-2.5mm (134WG | ||||||||
relay | Three 5A@25OVAC capacity yong electric alarm, can be set to open or close | |||||||
And incentive or non-excitation | ||||||||
Communication, RS485 Modous | ||||||||
The hook | ||||||||
Transmitter material | Aluminum alloy, 316 stainless steel | |||||||
Sensor material | 316 Stainless steel | |||||||
weight | Aluminum box: 2.4kg.316 stainless steel tone: 4.5kg | |||||||
way to install | Wall wall or pipe installation | |||||||
connect | Two M20 (or 2x34 " NPT field inlet, one M25 sensor connector | |||||||
Sex female | ||||||||
repetitiveness | + 1-1% Full range | |||||||
degree of linearity | / -1% Full range | |||||||
accuracy | + -5% Full range (o2, cO, H2S, catalytic combustion) | |||||||
Response when the same | T50215s, T90c30s (catalytic combustion and infrared sensor) | |||||||
Measured gas | ||||||||
Gas name | Gas range | increment | Default range | The gas concentration can be adjusted by grazing | ||||
oxygen | 25.0%Nol only | na | 25.0%Vol | 20.9%NoM fixed) | ||||
Knock into hydrogen | 10.0 to 100.0ppm | 1ppm | 5Oppm | 30 to 70% range | ||||
carbon monoxide | 100 to 1000ppm | 100ppm | 500pprm | 30 to 70% range | ||||
hydrogen | 1,0C0ppm only | n'a | 1,000ppm | (Typical value of 50%) | ||||
Helium dioxide | 10 to 50ppm | 5ppm | 10ppm | |||||
Jia Wan (catalytic combustion | 20,0 to100.0%LEL | 10%LEL | 100.0%LEL | |||||
Methane {IR) | 20,0 to 100.0%LEL | 10%LEL | 100.0%LEL | |||||
Propane (infrared) | 20,0 to 100.0%LEL | 10%LEL | 100.0%LEL | |||||
二氧化碳(红外) | 2.00%Vol only | na | 2.00%Vol | 0.8 to 1.2%%Vol | ||||
Note: The above product characteristics is that dysentery will slow down at 20'C~25℃ of humidity and low humidity environment.All of these provide only their typical examples Results of environmental testing at 50%RH.For the calibration, please use the calibration values.For detailed data, please contact Honeywell Analytics directly Hap and recommended flow detection if using weather protection cover and in the company. |
||||||||
The xcDRTD uses a Sensepoint ventilation-sensing saw | ||||||||
Gas name | Gas range | resolution ratio | Default range | Caliof gas concentration is recommended | ||||
15ppm only | 0.1 | 15.0ppm | 10ppm | |||||
50ppm only | 0.1 | 50.0ppm | 20ppm | |||||
ammonia | 50ppm only | 0.1 | 50.Oppm | 25ppm | ||||
100ppm only | 0.1 | 100ppm | 50ppm | |||||
1000ppm only | 1 | 1000ppm | 500ppm | |||||
l chlorine | 5ppm only | 0.01 | 5.0Oppm | 3ppm | ||||
15pprm only | 0.1 | 15.0ppm | 10ppm | |||||
nitrogen dioxide | 10ppm only | 0.1 | 10.0ppm | 5ppm | ||||
nitric oxide | 100ppm only | 0.1 100.0ppm | 50ppm |
Commercial / civil
From independent and in-place product control to programmable multipoint detection systems, the Vulcain brand gas detector family offers you a comprehensive solution and a reasonable price point.
apply:
Parking garage, machine room, cooler, office business building, shopping center, swimming pool, school, university and laboratory
industry
Honeywell detectors offers a range of fixed gas detection solutions for a wide variety of industrial and applied needs.These include: petroleum, petrochemical, metallurgy, steel and gas boiler room, commercial plant, freezing equipment, offshore oil and gas drilling platform and semiconductor production workshop.
Combustible gases, oxygen, and toxic gases for detection
The ability to detect as low as one per million (PPM) or even one in one billion (PPB) levels
Innovative use of four core sensing technologies: paper tape, electrochemical sensing unit, catalytic beads and infrared light
Under the premise of effective cost control to meet the requirements
Solutions for
Semiconductor / High-Tech
Provide a complete gas detection solution, including infrared light
Spectroscopy (MST) and anti-interference chemical tape solutions (MDAScientific) have the ability to detect as low as a billion- (PPB) levels.
apply:
Semiconductor manufacturing and nanotechnology
Space propulsion and security
Special chemical industry
portable
To protect individuals from gas-induced hazards, Honeywell Detection Limited has a range of reliable solutions that are very suitable for use in a confined space.
including:
Combustible gases, oxygen, and toxic gases for detection
Single gas individual detector is worn personally
Multi-gas portable detector-use at limited space entrances and specified required
Implement temporary area protection during the site construction and maintenance activities
technical service
At Honeywell Detectors Ltd, we always believe in the value of quality service and customer care.We are committed to providing a perfect and full range of services to maximize the
customers satisfaction degree ↵
Here are some of the services we offer:
Comprehensive technical support
Equipped with an expert team to answer questions and consult at any time
Fully equipped studio to ensure rapid completion of the maintenance process with delivery
Covering a wide range of technical support network