DWCT
Specifications detailed
contents of a project
Order product No. LX-101-Z
Model number LX-101-Z
The detection distance was 10 ± and 3mm
Light spot dimension: 1x5mm (set distance: 10mm)
Power supply voltage 12~24V DC ± 10% pulse P-P below 10%
Consumption current usually working: below 750mW (when supply voltage 24V, consumption current below 30mA)
In ECO mode: below 600mW (supply voltage at 24V, consumption current below 25mA)
Output a 1 NPN open-circuit collector transistor
Current inflow: 100mA
External voltage: below 30V DC (between output and 0V)
Remaining voltage: below 1.5V (when the inflow current is 100mA)
Output 1: short-circuit protection, equipment (automatic reset type)
Output 1: Output action color mark mode: ON / non-light entry ON (automatically set when teaching)
Color mode: ON / ON (set)
output 2-
Output 2: Short-circuit protection-
Output 2: The output action-
Reaction time color mode: below 45s
Color mode: below 150s
Teach the input NPN with no contact input
Signal condition: High... + 5V~ + V or disconnected, Low... 0~ + 2V (source current below 0.5mA)
Input impedance: about 10 kΩ
Numbers show a 4-bit red LED display
Sensitivity setting method When color marking mode: 2 point teaching / fully automatic teaching
Color mode time: 1 point of instruction
Set the sensitivity fine-tuning function is equipped
Timer function is equipped with variable on delay / off delay timer, valid / invalid conversion (timing time: 1~500ms 9 stages variable)
Environmental resistance: I protection structure IP67 (IEC), leakage type
Environmental resistance: use ambient temperature-10~ + 55℃ (note non-condensation, icing), when storage: -20~ + 70℃
Environmental resistance: use the ambient humidity: 35~85%RH, the storage time: 35~85%RH
Environmental resistance: Use environmental illumination incandescent lamp: light surface illumination below 3,000lx
Environmental resistance: voltage resistance AC1,000V 1 minute between all power connection terminals and housing
Environmental resistance: vibration resistance frequency of 10~500Hz double amplitude 3.0mm(MAX.20G) X, Y and Z directions for 2 hours each
Environmental resistance: impact resistance acceleration of 500 m/s2 (about 50G) X, Y and Z directions 3 times each
Red / green / blue composite LED (light projection peak wavelength: 640nm / 525nm / 470nm)
Material shell: PBT
Display cover: polycarbonate
Operation button: Silicone gel
Lens: glass
Lensed tube seat: aluminum
Cable (note): connector type without cable.Be sure to order additional connector-type connection cables.
The total length of the cable extending over 0.3mm2 can be extended up to 100m
Weight Body weight: about 55g
Packaging weight: about 120g
M4 screws with accessory washer (30mm long): 2
