Detection of failures for quick intervention: belt breakage, pump running dry, phase failure, supply fault, etc.
Preventative maintenance for reducing costs and optimizing the equipment: fault alert, operating time, etc.
Connection to building supervision network using ebmedded protocol
Dedicated “Building" series functions (fire mode, register monitoring, mechanical protection function, etc.
Communication bus most commonly used on the market integrated: Modbus, METASYS N2®, APOGEE FLN P1® and BACnet®. Optional: LonWorks
Complies to international standards and certifications: UL, CSA, C-Tick and NOM
Antiharmonic technology enables a THDI < 30% to be achieved
Speed range: 1:50
Transient overtorque: 110% - 60 s.
Integrated EMC filters, categories C1 to C3 depending on model
Altivar 212 covers motor powers between 0.75 kW and 75 kW on the following supplies:
– 200…240V 3-phase, from 0.75 kW to 30 kW, IP 21
– 380…480V 3-phase, from 0.75 kW to 75 kW, IP 21
– 380…480V 3-phase, from 0.75 kW to 75 kW, UL Type 12/IP 55
Applications:
Less noise pollution (airdraulic noise, motor noise, etc.)
Detection of transmission component breakage
Smoke extraction: forced start with fault inhibition
Automatic restart
Allows register management
Optimize control in fluid processing
Use of PID controller (temperature, flow rate, pressure, etc.)
Adjustable flow rates for better energy management
Suppression of mechanical resonance
Detection of underload/overload, pump running dry
Multi-motor configuration
Limitation of operating time at low speed
Sleep/Wake function
Pressure surge suppression for prolonging the life of the installation
