ZZC
| General branch specification | |
| ken | 110,100% Full cone view; central axis main 55 |
| sensitivity | High, high, medium, low: can be through the switch term section |
| Long time should time |
One square foot at 100 feet: 3 to 5 seconds; 1 Square foot positive heptane flame at 200 feet: 3 to 10 seconds |
| Frequency language sensitivity |
Visible light: 40o ~700 nm; Near-infrared: 0.7~1.1 microns; Broadband infrared: 1.1~7 microns; Poor belt infrared: 3.0~5.0 microns |
| working voltage | 18~ 32voC. Clustering 24voc |
| power dissipation |
Normal: 56 mA Alarm: 106 mA Heating: 155 mA Note: When the temperature is 0F (-17C). |
| Output relay sauce |
Alarm: SPDT (often open I often closed), off / sip, cable / non-performance storage; Fault: SPDT (often on), usually on, latch / nonlatch; Auxiliary: SPDT normally open / normally closed), off / suction, scale storage / non-lock storage; Contact Rated: 1A 24 voc |
| Investment to output | o-20 mA, user delicious line choose praise 2 or leakage |
| loop resistance | 50-400 MM |
| L word communication |
One of the following: -RS-485, ModBus inducement; - RS-485，FireBusl; · RS-485 Special Optional); |
| pilot signal | · HART, optional plug-in module" |
| temperature range |
Basket color LED indicator light: power supply; Red LED indicator light: alarm; Yellow LED indicator: fault; |
| Floodscale fan tian |
Job: -40~ + 185F (-40- + 85c); Storage: -67~ + 230°F (-55~ + 110°C)) |
| vibrate | 5~95%%RH, non-condensing |
| distribution | Meet or higher than MiISpec 810C Method 5142, curve AW12 standards |
| Electrical interface | 14 AWG (2.5mm) ~22 AwG (o.326mm), recommended |
| Shell material | Two 314 " NPT or two M25's |
| levels of protection | Group give or 316 no rust class |
| attestation | NEMA4 & 4x，IP66 |
| weight |
FM: Class ,Div.1 & 2,Groups B.C.& D Class ll.Dw.1&2,Groups E.F.&G Class lm ATEX: 2G D Ex d IlCT4 (Ta:-60~+110C)，T5 ( Ta:-60~+90C)，T6 (Ta:-60~+75C) CE: Compliance to EN6000-6-4 and EN50130-4 standards; SIL grade: FMEDA meets IEC61508 Security St. |
| install |
f To: 3.6 lbs (1.6 kg); Rrust: 7lbs (3.2 kg) |
| Quality Assurance | Rotary bracket optional R) |
