Bosch Rexroth solenoid valve

Bosch Rexroth solenoid valve
Directional seat valve, direct acting type
  
Model SED and SEW directional seat valves, direct acting type


Specifications 6 and 10
Installation surface according to DIN 24340 Type A and ISO 4401
Closed port, no leakage
Electromagnets with replaceable coils
When replacing the coil, there is no need to open the voltage chamber (SED model)
Even in a long-term high-pressure state, ensure flexible switching


Model SMM, SMR, SH, and SP directional seat valves, direct acting, triggered by mechanical or fluid means


Specifications 6 and 10
Control lever operation (SMM type)
Roller strut operation (SMR type)
Hydraulic operation (SH type)
Pneumatic operation (SP type)


KSDER and KSDEU directional seat valves, direct acting type


Triggered by Electromagnets (High Performance)


Specification 10
Closed port, no leakage
Even if it remains idle for a long time, ensure flexible switching
Wet needle DC electromagnet
Electromagnetic coil can rotate
Equipped with concealed auxiliary operating devices, optional
No leakage on both sides (2/2 type)


Directional seat valve, pilot operated


VEI model directional seat valve, pilot operated, triggered by electromagnet


06, 10A, 12A, 16A, and 16 series
Closed port, no leakage
Isolate at one end or the other end
UNF installation space


Directional slide valve direct acting type


Model WE directional slide valve, direct acting, electromagnetic trigger


Specification 6 to 10
Wet needle AC or DC electromagnet
Electromagnets with replaceable coils
Bottom plate installation ("P"): The installation surface shall comply with DIN 24340A and ISO 440 types
Electrical wiring can be wired separately or centrally
Optional induction positioning monitoring can be found in (RE 24830)
Smooth switching characteristics
   
Models WH, WHZ, WHD, WN, WP, and WPZ


Directional slide valve, direct acting, fluid triggered
   
Specification 6 to 32
Installation surface according to DIN 24340 Type A and ISO 4401
Adjustable itinerary (H-WH, WH type, specification 10)
Optional positioning monitoring through induction positioning switch (RE 24830)
Hydraulic operation (WH, WHZ, and WHD types)
Pneumatic operation (WN, WP, and WPZ types)


Models WMM, WMR, WMRA, WMU, and WMD


Directional slide valve, direct acting, motorized or manually triggered




Specification 4 to 32
Installation surface according to DIN 24340 Type A and ISO 4401
As a plug-in valve ("K" type)
Locate through the following methods
Inductive positioning switch or
Mechanical positioning switch, optional




Model KKDER directional slide valve, direct acting type


Electromagnetic trigger (high performance)


 
1 and 8 series