ZZC
Sensepoint gas, toxic gas and oxygen detector series provide high quality and low cost solutions for users' industrial gas detection needs.Install in a potential explosive area by using the corresponding Exd or Exe certified junction box.Sensepoint's industrial standard output can be a controller connected to the Honeywell Analytics or a third-party DCS / PLE system.Both combustible and toxic gas detectors are certified by the latest European ATEX safety and performance standards.
The Sensepoint toxic gas sensor can be applied in a dangerous environment, and its measurement range is shown in the technical instructions.Electrochemical technology can be used to detect the concentration of toxic gas in the environment accurately and stably, which can be used in the d area after being connected with the explosion-proof junction box. The sensor adopts an integrated intrinsically safe design, which can ensure rapid response even before the life of the sensor expires.The Sensepoint toxic gas sensor wiring mode is two-wire 4-20mA, which is suitable for most industrial situations.
Sensor type:
A. ammonia 0-50 / 100 / 1000ppm b. Oxygen 0-25%VOL
c. The chlorine gas 0-5 / 15ppm d. hydrogen sulfide 0-50 / 100ppm
E. Carbon monoxide 0-100 / 200 / 500ppm f. Hydrogen 0-1000 / 10000ppm
For g. Sulfur dioxide 0-15 / 50ppm h. Nitric oxide (nitrogen oxide) 0-100 / 500ppm
i. Nitrogen dioxide 0-10ppm
Note: After the power is switched off, oxygen, chlorine, nitrogen dioxide, sulfur dioxide and ammonia will take a steady time.
Standard M20 junction box
Anti-hydrocarbon (oil) steam filter layer
The SENSEPOINT sensor
M20 thread
hood
Sensor serial number / date of manufacture
EXD / E waterproof joint
technical parameter:
Operating temperature: -25℃ ~ + 50℃ Working humidity: 10-99%RH
Preheat time:, less than 3 minutes
Response time: T20 less than 5 seconds, T50 less than 12 seconds, T90 less than 30 seconds
Supply power supply: DC: 18V~30V, with a maximum power consumption of 0.9 watts
Output: 4-20mA linear error: less than 5% full range
Sensor life: more than 2 years
Zero point drift: Time: less than + 2% full range / year
Temperature: less than + 5% full range
Humidity: less than + 2% full range
Sensitivity drift: Time: less than + 4% full range / year
Temperature: less than + 2% full range
Humidity: less than + 2% full range
Sensor weight: 185 g Junction box Weight: about 0.5 kg
Structural material: anti-corrosive polyester shell
Level of protection: standard IP65
IP66 / 67 (fitted with protective cover)
Explosion proof certification:
CE attestation:
Optional Attachment:
Rain-proof dust cover
Calibration cover
Pipe wall mounting fittings
gas skirt
