DWCT
Parameter |
Value |
Default Value |
Description |
|
---|---|---|---|---|
Type |
Not used 0 - 10 V -10 - +10 V 0 - 20 mA 4 - 20 mA |
Not used |
Choose the mode of the channel. |
|
Min. |
0 - 10 V |
-32768...327671 |
0 |
Specifies the lower measurement limit. |
-10 - +10 V |
-10000 |
|||
0 - 20 mA |
0 |
|||
4 - 20 mA |
4000 |
|||
Max. |
0 - 10 V |
-32768...327671 |
10000 |
Specifies the upper measurement limit. |
-10 - +10 V |
10000 |
|||
0 - 20 mA |
20000 |
|||
4 - 20 mA |
20000 |
|||
Status Enabled |
Yes No |
Yes |
Enables the diagnostic byte of each channel. If the status is disabled (value = No), the status bytes IBStatusQWx do not contain relevant information. |
1 The 12-bit data (0 to 4095) processed in the analog I/O module can be linear-converted to a value between -32768 and 32767.
Variables can be defined and named in the I/O Mapping tab. Additional information such as topological addressing is also provided in this tab.
This table describes the I/O Mapping tab:
Variable |
Channel |
Type |
Default Value |
Description |
---|---|---|---|---|
Outputs |
QW0 |
INT |
-32768...32767 |
Command word of the output 0 |
QW1 |
INT |
-32768...32767 |
Command word of the output 1 |
|
Diagnostic |
IBStatusQW0 |
BYTE |
- |
|
IBStatusQW1 |
BYTE |
- |