ZZC
Product introduction
This product adopts the extraction principle to solve the problem of inconvenient gas detection in different environments to make corresponding solutions, so as to both reduce the cost and meet the requirements of customers.The product can be adjusted according to the user's environment, and the application is also very convenient.At present in the printing industry, power plants and other related industries have a wide range of application examples, has also won unanimous praise.
working principle
The HT-600 comprehensive extraction detection device adopts the extraction sampling system, which collects the sample gas through the sampling pump through the sampling pipeline (the sampling flow rate is 7.3 m/s; the outlet pressure of sampling pump is 2.5bar; the inlet vacuum degree of sampling pump is 160mbar).To enter the analysis box for analysis.All monitoring probes are installed in the analysis box and are connected to the sample trachea by the air hood.The process sample gas can effectively remove the potentially contaminated dust through the secondary fine filter, and adjust the flow rate of the sample gas into the detector through the high-precision visual float flowmeter, so as to achieve accurate measurement.
technical feature
The advantage of this scheme is that the sensor does not need to be installed inside the container under test, and multiple monitoring probes only need to open one sampling probe hole, and the opening diameter is very small.Effectively increase the container surface utilization rate.Second, the sensor is not blocked by the dust in the container, and is not susceptible to the corrosion, oxidation and oxidation of acid, alkali and humidity on the detector, effectively reducing the maintenance workload, and the sampling probe can even be maintenance free for life.The detector is installed outside the warehouse for staff maintenance, maintenance, observation, etc.
Technical parameter table:
Sampling the probe filter
Filter accuracy: 2 m
Through diameter: oneself 8
Interface: 101 outer thread
Material: 316 stainless steel
Length: 85mm
sampling probe
Probe length: 300- -1200 (mm)
Probe material: stainless steel
Flanged material: 304 stainless steel
Process connection; 1 / 4 inner thread
Sampling pipeline
diameter:φ10
Material: PTeflon
sampling pump
Sampling flow rate: 5.5 L/min
Sample air pressure: 2.5bar
Negative pressure of sample gas: 160mbar
The outlet flow rate of the sampling pump: 7.3 m/s (6)
Flow rate through the detector: 1.3 m/s (10)
Sampling and analysis control cabinet
Material: 304 stainless steel
Thickness: 1.5mm
Installation method: wall hanging
