ZZC
| Rated surge voltage | 8 kv |
| Degree of pollution | 3 |
| overvoltage category | m |
| lnsulating material group | |
| Maximum power dissipation for nominal condition | o.77 w |
| Maximum load current | 32 A(with 4 mmRconductor cross section) |
| Nominal current l, | 24 A |
| Nominal voltage Uw | 1000 v |
| open side panel | Yes |
| Ambient temperature (operation) | -6o "c ...85 'c |
| Ambient temperature(storage/transport) | -25"c ...55"C(For a short time,not exceeding 24 h,-60 to+70 "C) |
| Permissible humidity (storageltransport) | 30 %...70 % |
| Ambient temperature (assembly) | -5c...70 c |
| Ambient temperature (actuation) | -5"c ...70 "c |
| Shock protection test specification | DIN EN 50274 (VDE0660-514):2002-11 |
| Back of the hand protection | guaranteed |
| Finger protection | guaranteed |
| Result of surge voltage test | Test passed |
| Result of power-frequency withstand voltage test | Test passed |
| Power frequency withstand voltage setpoint | 2.2kV |
|
Result of the test for mechanical stability of terminal points (5x conductor connection) |
Test passed |
| Result of bending test | Test passed |
| Bending test rotation speed | 10 rpm |
| Bending test turns | 135 |
| Bending test conductor cross sectionlweight | 0.14 mm/0.2 kg |
| 2.5mm3/0.7 kg | |
| 4 mm/ 0.9 kg | |
| Tensile test result | Test passed |
| Result of tight fit on support | Test passed |
| Tight fit on carrier | Ns 35 |
| Setpoint | 1N |
| Result of voltage-drop test | Test passed |
| Result of temperature-rise test | Test passed |
| Requirement temperature-rise test | lncrease in temperature ≤ 45K |
| Short circuit stability result | Test passed |
| Conductor cross section short circuit testing | 2.5 mm3 |
| Short-time current | 0.3 kA |
| Conductor cross section short circuit testing | 4 mm" |
| Short-time current | 0.48 kA |
| Result of thermal test | Test passed |
